DMR is pleased to now be representing chilled and induction beams from NuClimate. These innovative products are designed to help create comfortable, healthy, and energy-efficient indoor climates.
NuClimate Active Overhead Chilled Beam
A Chilled Beam takes a source of primary air at an inlet static pressure ranging from 0.2" to 0.8” of WC. It distributes this air through a bank of specially designed aerodynamic nozzles and discharges the air at a high velocity into a mixing chamber. This creates a differential pressure which enables a draw of room air across a coil. This imparts either cooling or heating to the induced air as it passes over the coil.
The primary air and induced air are mixed and discharged through a grille in a coanda effect air distribution at the ceiling. This air circulates throughout the room and is gently drawn back up through the return section of the Chilled Beam grille. The total room air circulation is created solely by the induction principle within the terminal.
This eliminates the need for an electric motor and its power source. As a result, the Chilled Beam is a very quiet and efficient way to provide comfort in a space.
ACB
Chilled Beams
1-Way & 2-Way Blow Ceiling Mounted Chilled Beam
The model ACB is a 1-way or 2-way blow, ceiling mounted Chilled Beam that is linear in dimension. ACB models are available in 24” x 24”, 48” x 24”, and 72” x 24”. It is offered in 4 series: Series 18 is low capacity, Series 24 is medium capacity, Series 31 is medium-high capacity, and Series 38 is high capacity.
ACB Chilled Beams are perfect for:
- Office Space
- Dormitory Rooms
- Labs
- As a supplement to other Chilled Beams
NuClimate Active Overhead Induction Beams
An Induction Beam takes a source of primary air at an inlet static pressure ranging from 0.2" to 0.8” of WC. It distributes this air through a bank of specially designed aerodynamic nozzles and discharges the air at a high velocity into a mixing chamber. This creates a differential pressure which enables a draw of room air across a coil. This imparts either cooling or heating to the induced air as it passes over the coil.
The primary air and induced air are mixed and discharged through a grille in a coanda effect air distribution at the ceiling. This air circulates through-out the room and is gently drawn back up through the return section of the Induction Beam grille. The total room air circulation is created solely by the induction principle within the terminal.
This eliminates the need for an electric motor and its power source. As a result, the Induction Beam is a very quiet and efficient way to provide comfort in a space.
AIB
Induction Beam
1-Way & 2-Way Blow Ceiling Mounted Induction Beam
The model AIB is a 1-way or 2-way blow, ceiling mounted Induction Beam that is linear in dimension.
- Available in 24” x 24”, 48” x 24”, and 72” x 24”.
- Offered in 4 series: Series 18 is low capacity, Series 24 is medium capacity, Series 31 is medium-high capacity, and Series 38 is high capacity.
These units have a linear grille which discharges air through a single (2-way blow) or double (1-way blow) slot on the supply side. The return air is brought back to the unit through a perforated return section.
They are available in various dimensions and configurations and can be custom designed for a specific job. They were primarily created for areas that require between 9 CFM and 180 CFM of ventilation air. AIB units are available in 2- and 4-pipe configurations. These units have drain pans and can be designed to handle both sensible and latent loads in the occupied space.
AIB Induction Beams are perfect for:
- Office Space
- Dormitory Rooms
- Labs
- As a supplement to other Induction Beams